top of page

How to create color tones that resemble the sea for your art pieces.

Here are some tips that can help you:

    1. Choose the right colors: To create shades of colors that resemble the sea, it is important to choose the right colors. Shades of blue and green are ideal for this purpose. You can mix different shades of blue and green to create a more realistic effect.


    2. Add pigments: To create more intense color tones, you can add pigments to the resin. Pigments can be of different colors and allow you to create a wide variety of shades.


    3. Add glitter: To create a glitter effect on your resin piece, you can add glitter or mica. These materials reflect light and create a shimmering effect that resembles the glitter of the sea.


    4. Create layers: To create a more realistic effect, you can create layers of different shades of color. Start with a layer of light color and add layers of darker colors to create a depth effect.


    5. Experiment: Resin is a very versatile material that allows you to experiment with different techniques and materials. Don't be afraid to experiment and try different combinations of colors and materials to create a unique effect.


    6. Sand or shells: Adding sand or shells to resin can create a textured effect that resembles the beach. You can mix the sand or shells with the resin before pouring it into the mold.

A simple guide to making coasters with sea-like effects:

   1. Prepare the materials: To create resin coasters, you will need the following materials: epoxy resin, coaster mold, blue and green color pigments, glitter, mixing cups, mixing sticks, latex gloves and a kitchen torch.


   2. Mix the resin: Mix the epoxy resin according to the manufacturer's instructions. Add blue and green pigments to the resin and mix well to create a color tone that resembles the sea.


   3. Add the glitter: Add glitter to the resin and mix well to create a glitter effect that resembles the shimmer of the sea.


   4. Pour the resin into the mold: Pour the resin into the coaster mold. Be sure to fill the mold halfway to leave room for the top layer.


   5. Create the top layer: Mix more epoxy resin and add blue and green pigments to create a different color tone. Add glitter to the resin and mix well. Pour the resin into the mold to create the top layer.

6. Remove bubbles: Use a stir stick to remove air bubbles from the resin. You can also use a kitchen torch to remove the bubbles.


   7. Allow to dry: Let the resin dry according to the manufacturer's instructions. It usually takes about 24 hours to dry completely.


   8. Unmold the coasters: Once the resin has dried completely, carefully unmold the coasters.


That's it! You now have resin coasters with effects that resemble the sea. I hope you found this guide helpful.


Rated 0 out of 5 stars.
No ratings yet

Add a rating
bottom of page